 |
|
|
| |
|
|
|
|
|
|
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
All Aluminium Bare Conductor Overhead AAC AAAC ACS
|
| Supply Ability: |
500000km |
| Related proudcts |
cable, bare conductor, overhead cable, |
| Specifications |
Aluminum Conductor, Low Voltage, AAC, AAAC, ACAR, ACSR |
| Price Term: |
FOB, CIF, CFR |
| Port of loading: |
Tianjin, Qingdao, Shanghai or other ports |
| Minimum Order |
1km |
| Unit Price: |
0.5-20USD/km |
|
Product Description
1.Overhead service drop AAC (All Aluminium Conductors)
AAC Conductor cable is widely used in the overhead power transimission lines and distribution system,and it is one of the main products to form electrified wire network.
2.AAC conductor's construction:
AAC Conductor are constructed with a straight round central aluminum wire surrounded by one or more layers of helically laid aluminium wires.
The most commonly used stranding consists of 7, 19, 37, 61 and 91 wires.
In all constructions, the successive layers shall have opposite directions of lay, the outermost layer being right-handed.
3.AAC conductor Performance:
(1).The permissible long-time operating temperature for aerial conductor is 70oC.
(2).Under the circumstance that rare climate occurs and high ice coverage rate, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3).When connecting conductors, the conductor beside the connecting tube can’t be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are installed, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4).Under installation, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.
4. Manufacturing Standards
GB/T 1179-2008, IEC 61089, EN 50182, DIN 48201 Part 5, BS 215 Part 1, ASTM B231 or as required
Contact:
Angie Chen
Mob: 86-13785179568
Email: 745038264@qq.com |
| Company: |
Yiteng Cable Technology Hebei Co., Ltd.
|
| Contact: |
Ms. Angie Chen |
| Address: |
Donghai Building, Shijiazhuang, Hebei, China |
| Postcode: |
050200 |
| Tel: |
86-311-69022933 |
| Fax: |
86-311-69022931 |
| E-mail: |
|
|
|
Home
